CONCRETE FLOORING

COMMERCIAL FLOORING-POLISHING AND PLACEMENT OF FLOORING MATERIALS

SCP’s technology has been used to protect and preserve concrete in numerous successful applications.

Concrete Flooring

SCP TECHNOLOGY

SCP eliminates the need for a curing membrane and an epoxy-based water mitigation system as well as provides permanent concrete protection and waterproofing while also providing optimal conditions for densifying and polishing concrete.

Fast-Track the installation of commercial flooring on newly poured concrete: Pour to floor in 14 days.

SCP ensures that capillaries are blocked – permanently – thus turning the concrete surface into a suitable substrate that prevents pinholes. SCP penetrates the concrete, reacts with free alkali in the concrete, and forms a gel in the concrete pores. This results in waterproofed concrete that has been tested to withstand over 250-feet of Head Pressure (75-meters).

Our technology not only rejuvenates concrete capillary and pore structure and waterproofs existing non-coated concrete, but SCP can put a stop moisture-related commercial flooring failure permanently. No more moisture constraints form applying commercial flooring to newly poured concrete surfaces. No more waiting and spending valuable time holding up Commercial Flooring Contractors waiting 28days to do extensive testing for moisture problems in concrete.

Concrete Flooring

Waterproof Below-Grade Shotcrete

Unlike positive side membranes, SCP Treatments are tested to 335 feet of head pressure and can waterproof below-grade retaining walls while they’re drying in the entire excavated area. Note: As part of a complete waterproofing system, joints, cracks and penetrations still need to be sealed.

Protect Roof Decks Instantly

When used at the time of pour, SCP Treatments can cure and waterproof your roof deck immediately and save you the additional installation and removal costs of a temporary roofing system.

Save Parking Garages Maintenance Costs

Durability testing and analysis shows SCP treatments perform better than traffic coatings and are far less expensive, and as a permanent part of the concrete itself, SCP Treatments won’t have to be replaced every 5 years.

Work as Hard as You Want

SCP Treatments are verified to penetrate depths from 2 to 8 inches, so you can start drilling holes for pole braces and formwork sooner, and since shrinkage is reduced by 60 to 80%, you will have fewer closure pours and control joints throughout the process.

Fast Track Projects

SCP Treatments act as a barrier from weather above, allowing finish trades to perform wall framing, electrical, drywall, hardware installation, etc. without waiting for exterior or upper level construction to finish.

Polish Concrete Sooner and Quicker

Slabs treated with SCP are ready for polishing in just 14 days, with fewer cracks and less curl. SCP Treatments also act as a hardener, meaning polishing can be done in a 1/3 less time without the need for additional silicate application.

Pour to Floor in 14 Days

SCP Treatments greatly reduce the release of free moisture to such a low level that flooring and coatings can be applied in as little as 14 days and are covered by Spray-Lock’s 15-year warranty.

AVERAGE SAVINGS USING SCP

SCP Treatments cost far less than sealers or high performance concrete, work with all types of mix designs, provide permanent protection and save you money throughout the installation and for decades to come.

Slab Access After Curing
Total Vapor Control
Moisture Mitigation
Waterproofed Roofing

CONCRETE PROTECTION PRODUCTS AT WORK

A PROVEN SOLUTION TO CONTINUAL FAILURE OF CONCRETE INFRASTRUCTURE.

SCP technology Rejuvenates concrete capillary and pore structure as well as waterproofs existing non-coated concrete. Stop moisture-related flooring failure permanently.

No more moisture constraints when applying commercial flooring to newly poured concrete surfaces, no more moisture problems in concrete. Fast-Track Construction: Pour to floor in 14 days.